Lookah Seahorse Pro & Pro Plus Instruction Manual

First let me introduce The Lookah seahorse Pro has upgraded to Seahorse Pro Plus,just changed some details but the instruction manual is same. So whatever you are using seahorse pro or seahorse pro plus, please refer the same usage manual.

Xmas big discount for all products

Coupon:Xmas30

Due date:25th,12,2023

How to use Lookah Seahorse Pro & Pro Plus？

Turn on/off

Press the power button 5 times quickly within 2 second to turn ON/OFF

Change Voltage

Press the power button 2 times quickly to change three different voltage settings.

• Mode 1: 3.2V (Blue)
• Mode 2: 3.6V (Purple)
• Mode 3: 4.1V (White)

Manual Mode:

1. Turn the device on
2. Press and hold the power button for 3 seconds to heat up and start vaping. Continue to hold the power button to vape up to 20S.After 20s,the device will stop heating.

Automatic Mode:

1. Turn the device on
2. Press the power button 3 times quickly within 1.5s to automatic mode
3. In automatic mode the device keep preheating for 15s (indicator light flashing).Then automatically working for 30s (indicator light keeps on)
4. After automatically work for 30s,the device stop heating and back to manual mode,
5. Press the button 3 times to restart again.
6. While in Automatic mode,press the power button 3 times within 1.2S to exit,and back to manual mode.

Temperature Color Settings

1. Press the power button 5 times quickly within 2 second to turn ON/OFF.
2. Press the power button 2 times quickly to change three different voltage settings.

• Mode 1: 3.2V (Blue)
• Mode 2: 3.6V (Purple)
• Mode 3: 4.1V (White)

Alarm Indicators

1. Lower battery :flash 8 times in read
2. Temperature Protection:Flash 5 times in purple
3. Output short-circuit alarm:Flash10 times in yellow (Tip defective,please change the tip)
4. Open circuit:Flash 5 times in yellow.(Tip defective,please change the tip)
5. Output over-load alarm:Flash in Cyan 12 times(resistance<1Ω)
6. Button output over-time:Indicator light flash 2 times in the color of current mode.

Charging

1. when charging,the red light is flashing.
2. When the LED light turns to cyan,means fully charged.

How to Clean Looksh Seahorse Pro Plus

Product Feature:

1. Battery: 650mah
2. Charging current:250mA
3. In-put voltage:5V
4. Resistance:1.0Ω-9.99Ω
5. Output voltage:3.2V,3.6V,4.1V (When the battery voltage is lower than setup voltage,output voltage is current battery voltage)

Safety:

1. Over charge protection:stop charging when voltage is 4.25V
2. Over discharge protection:No output when voltage is lower than 3.2V,Power off when voltage is lower than 2.5V.
3. Short-circuit protection:No output when load is lower than 0.5R
4. Overload protection: No output when load is lower than 1R.
5. Temperature Protection: No output when temperature is over 158℉or lower than 5℉.
6. Smoke overtime protection:output shut down when keep smoking over 20s per time.

Notes

1. The device is a high-temperature product,it is normal that the housing becomes moderately heated during use.
2. If the housing get too hot to touch by hand during use,please turn off to cool down.
3. Continuous use may trigger over-heat projection system to force the device stop working.till the temperature down to safety range.

Kindly Reminder

1. This product is not intend for use by persons under smoking legal age,non smokers.women who are pregnant or breast feeding or persons with or at risk of liver or heart disease,high blood pressure,diabetes,or taking medication for depression and asthma.
2. Battery built-in the device,please avoid the device be exposed in high temperature or high humidity environment.
3. Keep the device away from water
4. Turn off the device when not in use.

Warranty

• 30 days from the date of purchase against manufacturer defects.
• Don't apply improper manual operation.